No products in the cart.
Double Sided Textured PEI+PEO
Suitable for Bambu Lab X1 Series/ Lab X1-Carbon Combo/Lab P1P,as well as any other models which match 257*257mm
Quote Now
- P/N:XCBP25045
- 257*257mm
- Suitable for Bambu Lab X1 Series/ Lab X1-Carbon Combo/Lab P1P,as well as any other models which match 257*257mm
- Double Sided PEO+Textured PEI Build Plate:The spring steel bed plate is come with 2 printing textures. One side is PEO surface which can print excellent mosaic pattern. Other side is textured PEI which can print frosted models.
- Excellent Adhesive for First Printing Layer:When the temperature of the heated bed is about 60℃, you can achieve good adhesion without tape or glue.
- Easily To Remove The Models:The PEO PEI print bed offer more flexiblility and high flatness. When the heated bed temperature drops to normal temperature, the models on the flexible PEO+PEI build plate will come off easily. But if the model is still stucking on the plate, gently bending the print plate and removing it.
- Support Various Filaments:For PEO build plate we suggest PLA, TPU, PETG. (The corresponding temperature PLA/TPU: 50-70℃; PETG: 70-80℃. PEI surface can prints PLA, PETG, ABS, TPU, ASA, PVA, PET, PA, PC etc.(The recommend temperature of PEI side is PLA/TPU: 50-60℃; PETG: 70-80℃; ABS: 80-100℃. If printing high-temperature filaments such as ABS, it is recommended to use the enclosure for printing or apply glue on the hot bed to assist with adhesion.
